Search for: All records

As the demand for potable water increases, direct potable reuse of wastewater is an attractive alternative method to produce potable water. However, implementation of such a process will require the removal of emerging contaminants which could accumulate in the drinking water supply. Here, the removal of atrazine, a commonly used herbicide, has been investigated. Using real and synthetic wastewater, as well as sludge from two wastewater treatment facilities in the United States in Norman, Oklahoma and Fayetteville, Arkansas, atrazine removal has been investigated. Our results indicate that about 20% of the atrazine is removed by adsorption onto the particulate matter present. Significant biodegradation of atrazine was only observed under aerobic conditions for sludge from Norman, Oklahoma. Next-generation sequencing of the activated sludge revealed the abundance of Noncardiac with known atrazine degradation pathways in the Norman aerobic sludge, which is believed to be responsible for atrazine biodegradation in our study. The detection of these bacteria could also be used to determine the likelihood of biodegradation of atrazine for a given wastewater treatment facility. 

Direct contact membrane distillation (DCMD) has been conducted to treat hydraulic fracturing-produced water using polyvinylidenedifluoride (PVDF) membranes. Tailoring the surface properties of the membrane is critical in order to reduce the rate of adsorption of dissolved organic species as well as mineral salts. The PVDF membranes have been modified by grafting zwitterion and polyionic liquid-based polymer chains. In addition, surface oxidation of the PVDF membrane has been conducted using KMnO4 and NaOH. Surface modification conditions were chosen in order to minimize the decrease in contact angle. Thus, the membranes remain hydrophobic, essential for suppression of wetting. DCMD was conducted using the base PVDF membrane as well as modified membranes. In addition, DCMD was conducted on the base membrane using produced water (PW) that was pretreated by electrocoagulation to remove dissolved organic compounds. After DCMD all membranes were analyzed by scanning electron microscopy imaging as well as Energy-Dispersive X-Ray spectroscopy. Surface modification led to a greater volume of PW being treated by the membrane prior to drastic flux decline. The results indicate that tailoring the surface properties of the membrane enhances fouling resistance and could reduce pretreatment requirements. 

Direct potable reuse of wastewater is attractive as the demand for potable water increases. However, the presence of organic micropollutants in industrial and domestic wastewater is a major health and environmental concern. Conventional wastewater treatment processes are not designed to remove these compounds. Further many of these emerging pollutants are not regulated. Membrane bioreactor based biological wastewater treatment has recently become a preferred method for treating municipal and other industrial wastewaters. Here the removal of five selected micropollutants representing different classes of emerging micropollutants has been investigated using a membrane bioreactor. Acetaminophen, amoxicillin, atrazine, estrone, and triclosan were spiked into wastewaters obtained from a local wastewater treatment facility prior to introduction to the membrane bioreactor containing both anoxic and aerobic tanks. Removal of these compounds by adsorption and biological degradation was determined for both the anoxic and aerobic processes. The removal as a function of operating time was investigated. The results obtained here suggest that removal may be related to the chemical structure of the micropollutants.